You must have heard that sodium hydroxide can be used to remove a lot of heavy oil when it is used, but in fact, we all know that sodium hydroxide itself is more alkaline when it is used, so it is also more serious for hand injuries when it is used, and the use of potassium hydroxide with degreaser is the same Like also can have better, but uses the effect,.

1、我們在進行配置的時候需要準備好850g水注入到除油池當中準備使用，然后再往里面依次添加進去合適劑量的氫氧化鉀，還有一些硫酸鈉、海藻酸鈉等物質，都投放結束之后就可以使用攪拌裝置對其進行攪拌知道均勻；

1. We need to prepare 850g of water to be injected into the deoiling tank for use, and then add a suitable amount of potassium hydroxide, sodium sulfate, sodium alginate and other substances into the tank in turn. After putting them into the tank, we can use the stirring device to stir them evenly;

2、然后再單獨準備一個塑料桶倒入進去水還有助劑等攪拌均勻知道其中的物質完全融化之后就可以將塑料桶當的倒入剛才攪拌均勻地除油池當中，這樣一個可以進行使用的除油劑就制成了；

2. Then prepare a separate plastic bucket, pour in water and additives, and stir them evenly. After knowing that the substance in the bucket is completely melted, you can pour the one in the plastic bucket into the oil removal tank which was stirred evenly just now. This is a kind of oil removal agent that can be used;

3、大部分的金屬在進行除油的時候只需要在除油劑當中浸泡10分鐘左右，如果有比較重的油污在輕輕地擦拭一下，差不多就可以達到一個比較好的除油效果，因為其實很多的工業當中使用的一些機械配件等因為長期在潤滑油的作用下是會有比較重的油垢的，所以一般這一種的也是需要經常對其進行清洗確保使用性能良好。

3. Most metals only need to soak in the degreaser for about 10 minutes when they are degreased. If there is a heavy oil stain, you can almost achieve a better degreasing effect by gently wiping it. In fact, some mechanical parts used in many industries will have heavy oil stain under the effect of lubricating oil for a long time, so it is a good choice In general, this one also needs to be cleaned frequently to ensure good performance.

使用氫氧化鉀配置除油劑來進行使用的時候其實效果往往也都是非常好的，而且因為其堿性是沒有氫氧化鈉那么強的，所以在進行使用的時候對于手部等的傷害也都是比較小的。

When using potassium hydroxide to configure degreaser, the effect is often very good, and because its alkalinity is not as strong as sodium hydroxide, the damage to hands is relatively small.