氫氧化鉀主要用于基本的化工原料.醫藥.日用化工等，有很強的堿性和腐蝕性.在使用過程中必須謹慎。那么大家對其在生產過程中要注意哪些有多少了解？下面就為大家作一個介紹。

Potassium hydroxide is mainly used for basic chemical raw materials, pharmaceuticals, daily chemicals, etc. It has strong alkalinity and corrosivity. It must be carefully used. So how much do you know about what you should pay attention to in the production process? Let me introduce you.

1.生產氫氧化鉀的工作人員應穿工作服，戴防塵面罩，防護眼鏡和手套。

1. Workers who produce potassium hydroxide should wear work clothes, dust masks, protective glasses and gloves.

2.產品制造車間應保持密封，但也要注意通風。

2. The product manufacturing workshop should be sealed, but also pay attention to ventilation.

3.如果發生氫氧化鉀泄漏，一定要用干石灰或蘇打灰混合，在合適的地點埋葬。

3. If potassium hydroxide leaks, it must be mixed with dry lime or soda ash and buried in a suitable place.

4.提醒大家，每天工作結束后，必須及時進行淋浴更衣，保持衛生。

4. Remind everyone that after work every day, you must take a shower and change clothes in time to keep clean.

化學藥品使用時要采取相應的措施，特別是接觸到氫氧化鉀等強堿，有助于操作者將皮膚與產品的直接接觸。為了保證使用，還應采取以下措施：

Appropriate measures should be taken when chemicals are used, especially when they are exposed to strong alkalis such as potassium hydroxide, which will help the operator to directly contact the skin with the product. In order to ensure safe use, the following measures should also be taken:

1.穿橡膠、耐酸堿的衣服，戴橡膠耐酸堿手套。

1. Wear rubber, acid-alkali resistant clothing and rubber acid-alkali resistant gloves.

2.遠離可燃性的可燃物。不要接觸酸，CO2，過氧化氫。

2. Keep away from combustible materials. Do not contact acid, CO2, hydrogen peroxide.

3.密封包裝，防止損壞。

3. Seal the package to prevent damage.

4.裝有緊急泄漏處理設備。

4. Emergency leakage treatment equipment is installed.

5.操作后徹底清洗接觸的身體部位。

5. Thoroughly clean the body parts after operation.

6.工作地點不能吃東西.喝水和抽煙。

6. Do not eat, drink or smoke at the workplace.

7.禁止排放環境。

7. It is prohibited to discharge the environment.

值得注意的是，氫氧化鉀會腐蝕金屬，所以在包裝時不能使用金屬物品，使用時應采用隔離包裝，以保證產品包裝。更多相關產品使用問題就來我們網站http://www.shrisa.cn咨詢！

It is worth noting that potassium hydroxide will corrode metal, so metal articles cannot be used in packaging, and isolation packaging should be used to ensure product packaging safety. More questions about the use of related products can be found on our website http://www.shrisa.cn consulting service